PRODUCTS > Gate valve > Cast iron gate valve

                  Cast iron gate valve

                  Product model: Z41T
                  Nominal diameter: DN15~1200mm
                  Nominal pressure: PN1.0~1.6MPa
                  Suitable temperature: ≤200℃
                  Applicable medium: water, steam, oil and so on
                  Main material: Cast Iron


                  [Essential information]

                          Cast iron gate valve is a valve, with small flow resistance, high height, long opening and closing time and other characteristics, the drawback is that maintenance is not convenient. There are two kinds of cast iron gate valves: wedge gate valve and parallel gate valve.

                  [Valve structure drawing]

                  [Standard parameter]

                  Connection standardGB/T 12232-2005
                  Inspection and inspectionJB/T 9092-1999
                  Test pressureGB 50243

                  [valve features]
                  1, small flow resistance. Inside the valve body, the medium passage is straight through, the medium flows in a straight line, and the flow resistance is small.
                  2, when opening and closing more effort. In comparison with the cut-off valve, the gate movement direction is perpendicular to the direction of the flow of the medium whether it is open or closed.
                  3, high height, long opening and closing time. The opening and closing stroke of the ram is larger, and the reduction is done by screw.
                  4, water hammer phenomenon is not easy to produce. The reason is that the shutdown time is long.
                  5, the media can flow in any direction on both sides, easy to install. Gate valves are symmetrical on both sides of the channel. 6 、 the length of the structure (the distance between the two connecting ends of the shell) is smaller.
                  7, sealing surface easy to wear and tear, affecting service life. When opening and closing, gate and valve seat two sealing surface friction, sliding, to medium pressure under the action of easy to produce abrasions, wear, affect sealing performance, shorten service life.
                  8, The price is more expensive. The contact sealing surface is more, and the processing is more complicated, especially the sealing surface of the flashboard seat is not easy to be machined, and the parts are more.
                  9, The shape is simple, the structure length is short, the manufacturing technology is good, and the scope of application is wide.
                  10, Compact structure, good rigidity of valve, smooth channel, small flow resistance, stainless steel and carbide alloy used in sealing surface, long service life, PTFE packing, reliable sealing, easy and flexible operation

                  [Adaptive condition]
                         The utility model is suitable for being used as closed-circuit equipment on pipelines of medium water and sewage, and is not allowed to regulate, regulate flow and empty out. This kind of gate valve is widely used in petroleum, chemical, pharmaceutical, power and other industries.

                  Corporate name
                  Leaving Message*
                  Verification code